- Information for Astronomers
- General Topics*
- Gruppen Seiten*
* Log-in required
* Log-in required
This receiver was build for spectroscopic observations. It has a linearly polarized feed.
Frequency [GHz] | Channel | Polarisation | Tcal [K] | Tsys [K] | Sensitivity [K/Jy] | SEFD [Jy] | Aperture Eff. [%] | TMB/S [K/Jy] | Main Beam Eff. [%] | FWHM [arcsec] | Last update |
---|---|---|---|---|---|---|---|---|---|---|---|
27.0 | A | linear | 7.2 | 68 | 0.94 | 71 | 34 | 1.8 | 54 | 30.5 | Mar 2010 |
30.0 | A | linear | 7.0 | 85 | 0.90 | 84 | 32 | 1.5 | 60 | 30.0 | Mar 2017 |
34.0 | A | linear | 12.0 | 75 | 0.86 | 86 | 30 | 1.5 | 61 | 25.0 | Mar 2010 |
36.1 | A | linear | 15.0 | 82 | 0.56 | 146 | 20 | 1.4 | 49 | 25.8 | Sep 2014 |
normalized Gain curve (G = A0 + A1·Elv + A2·Elv2) | Observed in / confirmed | ||
---|---|---|---|
A0=0.9161 | A1=4.28E-3 | A2=-5.5E-5 | Sep 2020 (29 GHz) |
A0=0.8473 | A1=1.0795E-2 | A2=-1.9074E-4 | Sep 2014 (36 GHz) |
Comments:
RX Name | Wavelength [cm] | Frequency (center) [GHz] | Nr. of Horns |
---|---|---|---|
P10mm 4-Box (26,5-38,5 GHz) | 1.0 | 26.5-38.5 | 1 |
Version: | Comment | ||
1. Cont./Line: 26,5-29,1 GHz (BW: 500 MHz) | Continuum and spectroscopy 1st freq. range | ||
2. Cont./Line: 28,52-32,7 GHz (BW: 500 MHz) | Continuum and spectroscopy 2nd freq. range | ||
3. Cont./Line: 32,3-38,5 GHz (BW: 500 MHz) | Continuum and spectroscopy 3rd freq. range | ||
4. Pulsar (BW: 500 MHz) | Pulsar version 1st freq. range (26.5-29.1 GHz) | ||
Horn offsets [arcsec] | -972.8, 1086.6 |
Note that the narrow line and VLBA IF channels are usually only available when the specific line version of the receiver was selected. In addition for most receivers with narrow line channels the cables at the patch board need to be connected by the receiver group.
To select different channel numbers in OBSINP, the online plot, or the toolbox the numbers have to be specified like c(1)+c(2) to add channel 1 and 2. E.g. channel 1 and 2 contain the LCP and RCP broadband channels, then "OnlPlot pen='c(1)+c(2)'" or "toolbox use='c(1)+c(2)'" will select these channels. In OBSINP the pen can be directly specified in the receiver selection menu.
Abbreviations:
SB: narrow band channel (Schmalband-Kanal), 100 MHz band width
BB: digital broad band channel (Breitband-Kanal), band width varies for different receivers
VLBA: VLBA IF, 500 MHz band width
BW: band width
TP: total power
1.0cm PFK (Multi-RX-Box I) | |||
---|---|---|---|
Channel | IF | Pol. | Comment |
1 | BB | linear | TP A |
2 | VLBA | linear | TP A |
BW | nchan | nu | Df | Dv | dv |
---|---|---|---|---|---|
MHz | MHz | kHz | km/s | km/s | |
100 | 32768 | 27000 | 3.1 | 0.034 | 0.039 |
100 | 32768 | 29000 | 3.1 | 0.032 | 0.037 |
100 | 32768 | 31000 | 3.1 | 0.030 | 0.034 |
100 | 32768 | 33000 | 3.1 | 0.028 | 0.032 |
100 | 32768 | 35000 | 3.1 | 0.026 | 0.030 |
100 | 32768 | 37000 | 3.1 | 0.025 | 0.029 |
500 | 32768 | 27000 | 15.3 | 0.169 | 0.197 |
500 | 32768 | 29000 | 15.3 | 0.158 | 0.183 |
500 | 32768 | 31000 | 15.3 | 0.148 | 0.171 |
500 | 32768 | 33000 | 15.3 | 0.139 | 0.161 |
500 | 32768 | 35000 | 15.3 | 0.131 | 0.152 |
500 | 32768 | 37000 | 15.3 | 0.124 | 0.143 |
BW … band width
nchan … number of spectral channels
nu … center frequency
Df … Channel separation (in frequency)
Dv … Channel separation (in velocity)
dv … Velocity resolution (dv=1.16*Dv)