- Information for Astronomers
- General Topics*
- Gruppen Seiten*
* Log-in required
* Log-in required
This is a 4-channel system mainly for sensitive continuum observations, polarimetry, VLBI and pulsar observations. Simultaneous operation with the S-band (13cm, 2.2 GHz) receiver for geo VLBI observations are possible.
Frequency [GHz] | Channel | Polarisation | Tcal [K] | Tsys [K] | Sensitivity [K/Jy] | SEFD [Jy] | Aperture Eff. [%] | TMB/S [K/Jy] | Main Beam Eff. [%] | FWHM [arcsec] | Last update |
---|---|---|---|---|---|---|---|---|---|---|---|
8.410 | I (BB) | RCP | 2.5 | 22 | 1.35 | 18 | 45 | 2.6 | 49 | 81.7 | Jul 2008 |
8.410 | J (BB) | LCP | 2.5 | 22 | 1.35 | 18 | 45 | 2.6 | 49 | 81.7 | Jul 2008 |
8.550 | I (BB) | RCP | 2.5 | 23 | 1.35 | 18 | 46 | 2.6 | 50 | 80.6 | Jul 2008 |
8.550 | J (BB) | LCP | 2.5 | 25 | 1.35 | 19 | 46 | 2.6 | 50 | 80.6 | Jul 2008 |
normalized Gain curve (G = A0 + A1·Elv + A2·Elv2) | Observed in | confirmed | ||
---|---|---|---|---|
A0 = 0.99500 | A1 = 4.3434e-04 | A2 = -1.0562e-05 | Feb 2007 |
Comments:
RX Name | Wavelength [cm] | Frequency (center) [GHz] | Nr. of Horns |
---|---|---|---|
S36mm + 13cm | 3.6/13 | 7.9-9.0 (8.35)/2.4 | 1 |
Version: | Comment | ||
1. Continuum (BW: 1.1 GHz) | Broad Band Continuum + Polarimeter | ||
2. Line (BW: 100 MHz) | Spectroscopy/Continuum using narrow band IF + VLBI IF Polarimeter | ||
3. Line (BW: 500 MHz) | Spectroscopy/Continuum using VLBA IF + VLBA IF Polarimeter | ||
4. Pulsar (BW: 1.1 GHz) | Pulsar 1.1 GHz BW Version | ||
5. Pulsar (BW: 500 MHz) | Pulsar 500 MHz BW Version | ||
6. Pulsar (BW: 100 MHz) | Pulsar 100 MHz BW Version |
Note that the narrow line and VLBA IF channels are usually only available when the specific line version of the receiver was selected. In addition for most receivers with narrow line channels the cables at the patch board need to be connected by the receiver group.
To select different channel numbers in OBSINP, the online plot, or the toolbox the numbers have to be specified like c(1)+c(2) to add channel 1 and 2. E.g. channel 1 and 2 contain the LCP and RCP broadband channels, then "OnlPlot pen='c(1)+c(2)'" or "toolbox use='c(1)+c(2)'" will select these channels. In OBSINP the pen can be directly specified in the receiver selection menu.
Abbreviations:
SB: narrow band channel (Schmalband-Kanal), 100 MHz band width
BB: digital broad band channel (Breitband-Kanal), band width varies for different receivers
VLBA: VLBA IF, 500 MHz band width
BW: band width
TP: total power
3.6cm SFK single horn receiver with polarimeter (+13cm offset horn for Geo-VLBI) | |||
---|---|---|---|
Channel | IF | Pol. | Comment |
1 | SB | RCP | TP A |
2 | SB | LCP | TP B |
3 | SB | cross | cos AB |
4 | SB | cross | sin AB |
5 | SB | RCP | 13cm, TP A |
6 | BB | LCP | TP A |
7 | BB | RCP | TP B |
8 | BB | cross | cos AB |
9 | BB | cross | sin AB |
10 | VLBA | LCP | TP A |
11 | VLBA | RCP | TP B |
12 | VLBA | cross | cos AB |
13 | VLBA | cross | sin AB |
BW | nchan | nu | Df | Dv | dv |
---|---|---|---|---|---|
MHz | MHz | kHz | km/s | km/s | |
100 | 32768 | 7800 | 3.1 | 0.117 | 0.136 |
100 | 32768 | 8000 | 3.1 | 0.114 | 0.133 |
100 | 32768 | 8200 | 3.1 | 0.112 | 0.129 |
100 | 32768 | 8400 | 3.1 | 0.109 | 0.126 |
100 | 32768 | 8600 | 3.1 | 0.106 | 0.123 |
100 | 32768 | 8800 | 3.1 | 0.104 | 0.121 |
500 | 32768 | 7800 | 15.3 | 0.586 | 0.680 |
500 | 32768 | 8000 | 15.3 | 0.572 | 0.663 |
500 | 32768 | 8200 | 15.3 | 0.558 | 0.647 |
500 | 32768 | 8400 | 15.3 | 0.545 | 0.632 |
500 | 32768 | 8600 | 15.3 | 0.532 | 0.617 |
500 | 32768 | 8800 | 15.3 | 0.520 | 0.603 |
BW … band width
nchan … number of spectral channels
nu … center frequency
Df … Channel separation (in frequency)
Dv … Channel separation (in velocity)
dv … Velocity resolution (dv=1.16*Dv)