- Information for Astronomers
- General Topics*
- Gruppen Seiten*
* Log-in required
* Log-in required
This is an old revision of the document!
Type | HEMT cooled |
Channel | 1 |
Receiver Noise Temperature | 10-40 K |
Bandwidth RF-Filters | See below filter combination |
Polarization | Linear |
Calibration | Noise Diode |
Feed | Primary Focus Horn |
Frequency Range | 27 - 38.7 GHz |
1.Local Oscillator | Multiplier 24*(ULO1= 1.22 - 1.488 GHz) |
1.IF | 2 - 4 GHz (Broadband) |
2.Local Oscillator | 4*(ULO2=937.5 MHz) |
2.IF | 500 - 1000 MHz |
Simplified Block Diagram of p10mm_receiver_withholzworth.pdf, (ZMK on 15.08.2019)
This system is equipped with 3 RF-Filters to suppress mirror frequency reception. During observation, the filter and ULO settings have to be selected according to the observation frequency (see block diagram).In March 2007 the LNA was replaced by an InP-HEMT MMIC-amplifier designed for the 9mm receiver. Therefore the noise figure at low frequencies is not ideal.This system is part of the Primary Focus Multi Frequency Box #1 (PM 1).